Anwendungen
Sprayidea 95 Wind Power Specialty Spray Adhesive is a vacuum-infusion -specific adhesive, temporarily holding fiberglass and carbon fiber to themselves or other mold surfaces during vacuum infusion process and resin transfer molding. Most importantly, infusion spray adhesive will not interfere with the curing process of vinyl esters, polyesters or epoxy resins. In fact, the adhesive is designed to ultimately become a part of the polymer matrix, it cross links with the resin as it flows through and leaves no contaminants.
Sprayidea95 RTM process Hi Tack Composites Spray adhesive is specially designed to hold reinforcing fibers together during the infusion process firmly. It works with most resin systems, including polyester, vinyl ester, and epoxy. This adhesive won’t interfere with the curing process of vinyl esters, polyesters, or styrene resins and will ultimately become part of the polymer matrix. It is suitable for large projects like aerospace, yacht, wind blade, etc.
- Lay up of fiber sheets
- Dry lay up and infusion process-Bonding layered composite assemblies
- Ideal for infusion/vacuum forming composites
- Bonds fiberglass, carbon fabric, Acrylic and more
Spezifikation
tem No.: | Sprühidee 95 | Größe: | 450g/550ml |
Paket: | 24 Stück/Karton | Verbindung: | Vorübergehend |
Sprühmuster: | Nebel | Wirkungsdauer: | 30-60 Sekunden |
Haltbarkeit: | 24 Monate | Herkunftsland: | China |
Farbe: | Klar | Duft: | Geruchsarm |
Remain tacky for: | 60 minutes | Temperaturbeständigkeit: | -30℃ bis 65℃ |
Merkmale
Sprayidea95 Multipurpose Hi Tack Composites Spray Adhesive suitable for the Aerospace, Yacht, and Wind blade production industry with features.
- Good adhesion to a variety of substrates.
- Can be applied quickly;
- Excellent properties, cost-effective;
- Longer tack-up work time allow some position adjustment before setting;
- Suitable for large projects;
- Formulated to match adhered materials acting to the strength of the finished parts.
Anweisung
- Keep the surface clean and dry, no oil and water.
- Um die optimale Wirkung zu erzielen, bitte vor Gebrauch gut schütteln.
- Den Kleber im Abstand von 15-30 cm gleichmäßig auf die Klebefläche aufsprühen.
- Halten Sie die Dose nach der Verwendung bitte gesenkt und sprühen Sie etwa 2 bis 3 Sekunden, um ein Verstopfen der Düse zu vermeiden. Die optimale Temperatur zur Verwendung dieses Produkts liegt bei 15 bis 35 °C.
- Bei Verstopfung die Düse mit Alkohol oder anderen Lösungsmitteln reinigen.
Vorsicht
- Unter Druck stehende Verpackung, kann bei hohen Temperaturen explosiv sein.
- Für gute Belüftung sorgen und bei der Anwendung den Kontakt des Klebers mit der Haut vermeiden.
- Sollte an einem gut belüfteten, dunklen, kühlen und trockenen Ort gelagert werden.
- Nicht über 49 °C lagern, Lagerung unter 30 °C empfohlen.
- Halten Sie Kinder davon fern und sprühen Sie den Klebstoff vollständig aus, bevor Sie ihn wegwerfen.
- Bei Kontakt des Klebstoffs mit Haut oder Augen bitte mit Wasser abspülen. Bei schweren Fällen sofort einen Arzt aufsuchen.
Sprayidea Service
- Domestically and globally Sprayidea solely work with a dealer network for sales
- OEM&ODM are available
- Sample can be send to be customers tested.