Aplicaciones
Sprayidea 95 Wind Power Specialty Spray Adhesive is a vacuum-infusion -specific adhesive, temporarily holding fiberglass and carbon fiber to themselves or other mold surfaces during vacuum infusion process and resin transfer molding. Most importantly, infusion spray adhesive will not interfere with the curing process of vinyl esters, polyesters or epoxy resins. In fact, the adhesive is designed to ultimately become a part of the polymer matrix, it cross links with the resin as it flows through and leaves no contaminants.
Sprayidea95 RTM process Hi Tack Composites Spray adhesive is specially designed to hold reinforcing fibers together during the infusion process firmly. It works with most resin systems, including polyester, vinyl ester, and epoxy. This adhesive won’t interfere with the curing process of vinyl esters, polyesters, or styrene resins and will ultimately become part of the polymer matrix. It is suitable for large projects like aerospace, yacht, wind blade, etc.
- Lay up of fiber sheets
- Dry lay up and infusion process-Bonding layered composite assemblies
- Ideal for infusion/vacuum forming composites
- Bonds fiberglass, carbon fabric, Acrylic and more
Especificación
tem No.: | Sprayidea 95 | Tamaño: | 450g/550ml |
Paquete: | 24 piezas/cartón | Vinculación: | Temporario |
Patrón de rociado: | Neblina | Tiempo de efecto: | 30-60 segundos |
Duración: | 24 meses | País de origen: | Porcelana |
Color: | Claro | Aroma: | Poco olor |
Permanece de mal gusto para: | 60 minutos | Resistencia a la temperatura: | -30 ℃ a 65 ℃ |
Características
Sprayidea95 Multipurpose Hi Tack Composites Spray Adhesive suitable for the Aerospace, Yacht, and Wind blade production industry with features.
- Good adhesion to a variety of substrates.
- Can be applied quickly;
- Excellent properties, cost-effective;
- Longer tack-up work time allow some position adjustment before setting;
- Suitable for large projects;
- Formulated to match adhered materials acting to the strength of the finished parts.
Instrucción
- Keep the surface clean and dry, no oil and water.
- Agite bien antes de usar para lograr el mejor efecto.
- Rocíe uniformemente el pegamento a una distancia de 15 a 30 cm de la superficie adhesiva.
- Después de usarlo, mantenga la lata baja y rocíe durante 2 a 3 segundos para evitar que la boquilla se obstruya. La mejor temperatura para usar este producto es de 15 ℃ ~ 35 ℃.
- Limpie la boquilla con alcohol u otros solventes si está obstruida.
Precaución
- Empaquetadura presurizada, puede ser explosiva a altas temperaturas.
- Manténgalo bien ventilado, evite que el pegamento entre en contacto con la piel cuando lo use.
- Debe almacenarse en un lugar bien ventilado, oscuro, fresco y seco.
- No almacenar por encima de 49 ℃, se recomienda almacenar por debajo de 30 ℃.
- Mantenga a los niños alejados, rocíe el adhesivo por completo antes de tirarlo.
- Cuando el adhesivo entre en contacto con la piel o los ojos, límpielo con agua. En serio por favor acuda al médico inmediatamente.
Servicio Sprayidea
- Domestically and globally Sprayidea solely work with a dealer network for sales
- OEM&ODM are available
- Se puede enviar una muestra para que los clientes la prueben.