Applications of Screen Printing spray adhesive
Spryaidea 91 Low VOC Hi-Temp Spray Adhesive for Screen Printing is specially designed for screen printing industry. With its high performance, it can also be used in applique, quilting, sewing, handicraft, and other temporary bondings.
spécification
Numéro d'article : | Sprayidea 91 | Taille: | 450g/550ml |
Emballer: | 24 pièces/carton | Collage : | Temporaire |
Modèle de pulvérisation : | Brume | Temps d'effet : | 30-60 secondes |
Durée de conservation : | 24mois | Pays d'origine: | Chine |
Couleur: | Clair | Parfum: | Une faible odeur |
Restez collant pour : | 45 minutes | Composition: | Pas de CFC |
Features of screen printing adhesive spray
- Low VOC compliant: This reduces indoor air pollution and its impact on human health.
- Remain tack even under 200℃: It means that when you need use heat transfer, the glue will also not loosen and fall off.
- Never transfer to fabrics: You will never need to worry that the glue will stick to the materials.
- Long repositionable: You can adjust it many times before you are completely sure of where you want to print.
Maybe you want to get more choices of spray glue for screen printing, please contact us! Anyway, as a manufacturer, we will definitely be able to give you the best quality service
Instruction of Heat resistant Screen Printing Glue
- Keep the surface clean and dry, no oil and water.
- Veuillez bien agiter avant utilisation pour obtenir le meilleur effet.
- Vaporisez uniformément la colle sur une distance de 15 à 30 cm sur la surface adhésive.
- After using please keep the can down, spray about 2 to 3 seconds to avoid nozzle clogged.
- The best temperature of using this product is 15℃~35℃.
- Nettoyer la buse avec de l'alcool ou d'autres solvants si elle est bouchée.
Prudence
- Emballage sous pression, peut être explosif à haute température.
- Gardez bien aéré, évitez que la colle n'entre en contact avec la peau lors de l'utilisation.
- Doit être stocké dans un endroit bien ventilé, sombre, frais et sec.
- Ne pas stocker au-dessus de 49 ℃, stockage recommandé en dessous de 30 ℃.
- Éloignez les enfants, vaporisez complètement l'adhésif avant de le jeter.
- Lorsque l'adhésif entre en contact avec la peau ou les yeux, veuillez le nettoyer à l'eau. Sérieux, va chez le médecin immédiatement.
Explore a variety of screen printing spray adhesives by clicking here for more options. Or contact us to get more information.