응용
Sprayidea 95 Wind Power Specialty Spray Adhesive is a vacuum-infusion -specific adhesive, temporarily holding fiberglass and carbon fiber to themselves or other mold surfaces during vacuum infusion process and resin transfer molding. Most importantly, infusion spray adhesive will not interfere with the curing process of vinyl esters, polyesters or epoxy resins. In fact, the adhesive is designed to ultimately become a part of the polymer matrix, it cross links with the resin as it flows through and leaves no contaminants.
Sprayidea95 RTM process Hi Tack Composites Spray adhesive is specially designed to hold reinforcing fibers together during the infusion process firmly. It works with most resin systems, including polyester, vinyl ester, and epoxy. This adhesive won’t interfere with the curing process of vinyl esters, polyesters, or styrene resins and will ultimately become part of the polymer matrix. It is suitable for large projects like aerospace, yacht, wind blade, etc.
- Lay up of fiber sheets
- Dry lay up and infusion process-Bonding layered composite assemblies
- Ideal for infusion/vacuum forming composites
- Bonds fiberglass, carbon fabric, Acrylic and more
사양
tem No.: | Sprayidea 95 | 크기: | 450g/550ml |
패키지: | 24개 조각/판지 | 본딩: | 일시적인 |
스프레이 패턴: | 안개 | 효과 시간: | 30~60초 |
유효 기간: | 24개월 | 원산지: | 중국 |
색상: | 분명한 | 향기: | 냄새가 적음 |
끈적임이 남아 있는 경우: | 60 minutes | Temperature resistance: | -30℃to 65℃ |
Features
Sprayidea95 Multipurpose Hi Tack Composites Spray Adhesive suitable for the Aerospace, Yacht, and Wind blade production industry with features.
- Good adhesion to a variety of substrates.
- Can be applied quickly;
- Excellent properties, cost-effective;
- Longer tack-up work time allow some position adjustment before setting;
- Suitable for large projects;
- Formulated to match adhered materials acting to the strength of the finished parts.
지침
- Keep the surface clean and dry, no oil and water.
- 최고의 효과를 얻으려면 사용하기 전에 잘 흔들어주세요.
- 접착제 표면에서 15~30cm 거리에 접착제를 고르게 분사합니다.
- 사용 후에는 캔을 내려놓고 노즐이 막히지 않도록 2~3초 정도 분사하세요. 본 제품을 사용하기 가장 좋은 온도는 15℃~35℃입니다.
- 노즐이 막힌 경우 알코올이나 기타 용제로 노즐을 청소하십시오.
주의
- Pressurized packing, may be explosive in high temperature.
- Keep well-ventilated, avoid the glue contacting with skin when using.
- 통풍이 잘되고 어둡고 서늘하고 건조한 곳에 보관해야 합니다.
- 49℃ 이상에서는 보관하지 마시고, 30℃ 이하에서 보관하는 것을 권장합니다.
- 어린이의 손이 닿지 않는 곳에 보관하고, 버리기 전에 접착제를 완전히 뿌리십시오.
- 접착제가 피부나 눈에 닿았을 때는 물로 닦아주세요. 심각한 경우 즉시 의사에게 가십시오.
Sprayidea Service
- Domestically and globally Sprayidea solely work with a dealer network for sales
- OEM&ODM are available
- Sample can be send to be customers tested.